USB TRANSLATOR 2.0 | COMPATIBILITY CHART

RE: Noregon JPRO Commercial Fleet Diagnostics 2019 v1 (free) ( 05:55 PM) Kagutaba Wrote: Hey bro got my hwid attached but i have to change file type to.txt because it wouldnt let me post on site, if you need me to send the file in a different way let me know thanks.

1. .NOTE. you must already have the driver that came with the cable installed. 0.21: Log In and Download: Save downloaded file as.exe and run it to install driver patch. International®International® EZ-Tech™ IC3 COM: 2.21: Log In and Download: Save downloaded file as.exe and run it to install driver. International®International® J1939.
2. Noregon has everything you need for your PC Diagnostics Solution, including a Universal Data Link Adapter, OEM software, Fleet Managment Software and Laptops.

Frequently used translator drivers may be found on your software installation media (DVD, USB thumb drive, downloaded install package). Refer to your application ReadMe file for more information.

Download Noregon Driver License

Other Supported Translators

Manufacturer	Translator
NEXIQ Technologies	Nexiq USBLink, Nexiq USBLink 2
DG Technologies	Dearborn DPA4 Plus, Dearborn DPA5

For any needs you may have related to the other supported translators listed above, please contact the translator manufacturer.

Noregon Wireless/USB Translator 2.0 Driver Download

Latest Version: 4.0.7445.1 Updated June 04, 2020 38.3MB
Latest Firmware Version: 2.19

Important: The DLA+ 2.0 Wireless firmware must be updated in addition to the drivers. The firmware will automatically update the first time you attempt to connect to an application.

Run the Driver Installation

1. From USB – if installation does not automatically start, run the “dlawir32_full_x86x64_4.0.7445.1.exe” file from the USB.
2. From the web site – download the executable and save to your hard drive; then run “dlawir32_full_x86x64_4.0.7445.1.exe” from your hard drive.
3. On the “Install” screen, select “Install”.
4. On the “Welcome” screen, select “Next”.
5. Read the license agreement and select “I agree” checkbox and then select “Next”.
6. Select or accept the default installation path and then select “Install”.
7. On the “Ready to Install” screen, select “Next”.
8. When complete, select “Finish”.

Program the New Firmware

1. Attach your DLA+ 2.0 Wireless Adapter to your computer via USB and to a vehicle to insure adapter is powered.
2. Connect to any supported OEM application.
3. Follow on-screen instructions to allow the firmware to be updated

Connection Instructions

To connect to the TCM in Allison DOC®, select 'F4 - Connect'. In the Transmission Connect window, select the correct Transmission Type.

If you are using one of the following translator devices, you can take advantage of the SmartConnect feature for Allison DOC® to automatically detect the correct translator protocol:

• Noregon DLA+ Wireless 2.0 (USB)
• Noregon DLA+ Wireless (USB)
• Nexiq USB-Link
• Nexiq USBLink 2
• Dearborn DPA 4+

To use SmartConnect, check the SmartConnect box and select 'Connect'.

If you are using a different translator than listed above, uncheck the SmartConnect box and select 'Connect'. On the Communications Adapter Setup window, the Translator Device dropdown will allow you to select from translators that are supported by Allison DOC®. Select the appropriate Translator Device and Protocol and select 'Connect'.

If your translator is not present in the list, select 'Advanced Setup'. The Advanced Setup selection is not available for CEC transmissions. The Vendor dropdown will allow you to select your translator using the manufacture identifier. For example, the Noregon DLA+ Wireless 2.0 translator manufacture identifier is DLAWIR32. Note that translators that are not supported by Allison DOC® may not successfully connect to your TCM. Technical support is not available for translators that are not officially supported by Allison DOC®.

Noregon Driver Download

If your translator is not available for selection in the Communications Adapter Setup window or the Advanced Setup window, verify your translator driver is installed on the computer.

Basic Connectivity Troubleshooting

• Make sure the ignition is on.
• Make sure all of the cables and connectors are in good condition and are compatible with your translator.
• Make sure that you have selected the correct transmission type.
• Disconnect then reconnect the translator device from both the PC and the vehicle's diagnostic port.
• Make sure you have the most current translator device driver version installed on your PC.
• Close the application, disconnect the translator device from the PC, reboot the PC and try to reconnect.
• Ensure the TCM has sufficient power.
• Use the Data Bus Viewer feature to verify correct adapter installation and cabling. OBDII cables are required from GMLAN and J1850 communications and an OBDI cable is required for CEC transmissions. These cables are not included in the Kit for Noregon Wireless/USB Translator - All Allison Products, but are available for purchase.

If you receive this pop up when accessing the link please click the X to close the window and proceed to select Download.

Need Help Locating the Downloaded file?

After downloading the Tech Tool Installer file. It will display at the bottom of your web browser. Click the arrow and select OPEN to run the file.

You can also locate the file, Tech Tool Installer.exe, by accessing File Explorer > Downloads Folder

Guide:Click hereto access information on connection tips, identifying your truck’s electrical system, and for a description of the various connectors, cables, and adapters (ie. VOCOM, NEXIQ, J-PRO, DEARBORN, Cables: 6 pin, 9 pin and 16 pin).

Adapters and Firmware Updates: Need to find out which adapter is compatible with Premium Tech Tool? See the Adapter Matrix below for more information and ensure that the latest released firmware is downloaded to the communication unit. Note: Do not use long expansion cables with USB hubs.

Compatible Adapter Matrix for TT 2.7 (All Brands)
Compatible Adapter-Matrix for 2.6 (All Brands)

The following Software Drivers and Documentation are available for PTT:

VOCOM II

VOCOM II Release Notes (v 4.3.0)

VOCOM II Driver (Version 3.4.1.837) – Now available for TT 2.6.36

VOCOM I

VOCOM I Device Driver/Firmware Update (Version 2.5.0.0)for use with TT 2.6.xx / TT 2.7.xx

VOCOM I Device Driver/Firmware Update (Version 2.4.0.0) for use with TT 2.6.00

Support Tool 2.8.0.1: Designed to assist support personnel in resolving PTT issues, used for – gathering log files, verifying installation/functional status, and to perform a complete removal of PTT from a computer. Click here to download

SVG Viewer – to view Scalable Vector Graphics in browsers that do not provide SVG: Click here to download

MultiChannel Tool – Click here to download

VMAC III Service Tools

Noregon Driver Download

• Includes VMAC III Service Diagnostics and VMAC III Customer Data Programming Software. Click here to download Software.

VMAC III Support Software User Guide.

User Authorization:

Are you having trouble with user authorizations on Premium Tech Tool? If so, be sure to check out the link below for more information, troubleshooting, and example scenarios regarding PTT user IDs, client IDs, and Partner IDs.

Download Noregon Driver Download